Magnetic Circle Layout & Burning Guide - 28439 - Flange Wizard
Soldadura,Fabricación De Metales,Proyectos De Soldadura,Herrería,Magos,Taller,Garaje,Welding Gas,Metal Working
Height Marker by astroracer -- While building my Astro van i narrowed the existing rear wheel tubs. After I had cut them out I had to mark a line so I could trim them off at an even height. I simply hose clamped a Sharpie to my scribe and set it at the required height. With the tubs clamp square to the table it was quick job to get them both marked at the same width. After marking. After trimmoing....
Woodpeckers One-Time Tool Straddle Square 1-3/4 inch
Metal Bender by Mayhem -- Homemade metal bender fabricated from bar stock and bolts. Capable of bending rod and flat bar up to 6mm thick. http://www.homemadetools.net/homemade-metal-bender-13
Repair Damaged Nuts and Bolts
A rethreading kit is an important part of any automotive toolbox. Use it to restore stripped threads on old, rusty nuts and bolts when you don't have time to search the stores for a replacement.
Often overlooked skill that students need to understand and perform. OLT
Homemade Coal Forge, I might need this to make hook tools for bowl turning