Explora Asamblea, Nota, ¡y mucho más!

Explorar temas relacionados

TIENDA NOTA - elevador tijera ajustable Asamblea Jig le da una mano extra

TIENDA NOTA - elevador tijera ajustable Asamblea Jig le da una mano extra

If your second home is your shop, make your time in it even more enjoyable with these handy shop tips

If your second home is your shop, make your time in it even more enjoyable with these handy shop tips

Las mujeres nos ponemos diferentes sombreros cada día  y en una sociedad donde el tiempo es dinero, el aprender a ser mas eficiente, es exactamente  lo que necesitamos para ser mas organizadas, dormir mejor, y ser la MEJOR versión de ti misma...

{Quick Tips} Every Woman Should Know How to Be More Efficient.

Las mujeres nos ponemos diferentes sombreros cada día y en una sociedad donde el tiempo es dinero, el aprender a ser mas eficiente, es exactamente lo que necesitamos para ser mas organizadas, dormir mejor, y ser la MEJOR versión de ti misma...

Adjustable Saw Horses

Adjustable Saw Horses

Patching Furniture (aka Dutchman). Popular Science, circa July 1928, page 97

Patching Furniture (aka Dutchman). Popular Science, circa July 1928, page 97

Table saw jointer jig. Sacrificial fence made from MDF with laminate "outfeed" table.

Table saw jointer jig. Sacrificial fence made from MDF with laminate "outfeed" table.

Been frustrated by poor-quality cuts using your portable power tools? Following these pointers will ensure wander-free machining and reduced tear-out. ■ Clamp a straightedge to the workpiece as a guide for the tool. You don’t need a fancy guide—the factory-cut edge of a piece of MDF or melamine panel works great, as shown. ■ Use sharp, clean blades and bits. ■ Clamp a backer to the workpiece on the appropriate face to avoid chip-out. ■ Use a slow feed rate, but be careful not to go too…

Been frustrated by poor-quality cuts using your portable power tools? Following these pointers will ensure wander-free machining and reduced tear-out. ■ Clamp a straightedge to the workpiece as a guide for the tool. You don’t need a fancy guide—the factory-cut edge of a piece of MDF or melamine panel works great, as shown. ■ Use sharp, clean blades and bits. ■ Clamp a backer to the workpiece on the appropriate face to avoid chip-out. ■ Use a slow feed rate, but be careful not to go too…

excellent and versatile cabinet jacks for solo installs/ could also be infeed/outfeed tables on saw horses

excellent and versatile cabinet jacks for solo installs/ could also be infeed/outfeed tables on saw horses

Table saw crosscut sled

Table saw crosscut sled

#router table    http://www.shoptours.org/shop_tours/files/tom-clark.html

#router table http://www.shoptours.org/shop_tours/files/tom-clark.html

Pinterest
Buscar